ENGINELAST™
VEHICLE PRODUCT WARRANTIES
© 2009 EngineLast Industries Inc.
PRODUCT INFORMATION
FUNCTION AND APPLICATION: A water soluble oil lubricant with corrosion inhibitors compounded to
lubricate and protect metals in automotive cooling systems. Can be used with Standard and Dex-Cool
type anti-freeze.
OUTSTANDING PROPERTIES: Penetrates all working parts of the water pump. Helps to stop squeaking,
chattering and squealing caused by dry seals. Constant lubrication prevents seals from deterioration.
Keeps entire cooling system cleaner and free from dirt. Reduces foaming which increases heat transfer
and inhibits evaporation of coolant.
USE DIRECTIONS: Pour entire contents of bottle into cooling system. Use after installing new or rebuilt
water pump. If cooling system is dirty or rusted, clean system first.
NOTE: Used anti-freeze/coolant and radiator fluids may be considered hazardous in some areas.
Dispose of in sanitary sewer system where permitted. Never pour onto ground or into storm or septic
sewer systems. (See DISPOSAL, below) For extra capacity systems, use two cans of product.
PRODUCT LIMITATIONS: Will not seal existing leaks in cooling systems. Must be replenished if coolant
is partially or totally lost.
PRECAUTIONS: Contains Naphthenic Petroleum Oil (64742-52-5), Triethanolamine (CAS# 102-71-6).
Eye and Skin irritant. Harmful if swallowed. FIRST AID: If eye contacted, flush with water for at least 15
minutes while lifting eyelid and get prompt medical attention. If skin is contacted, wash thoroughly with
soap and water. If irritation persists get prompt medical attention. If swallowed, do not induce vomiting.
Call Poison Control Center, physician or Hospital Emergency Room Immediately.
STORAGE & HANDLING: Store in a cool place below 1200F away from acids, ignition sources and
oxidizing agents. The wearing of contact lenses while working with this product is inadvisable. Keep out of
reach of children and animals.
DISPOSAL: Use and dispose of product, container, residue and used Anti-freeze/coolant and Radiator
Fluids in accordance with all local, state and federal laws and regulations. Where permitted, dispose of in
sanitary sewer systems. Never pour onto ground or into storm sewer systems.
CONTAINER DESCRIPTION: Packaged 4 fluid ounces in a clear plastic bottle.
THE HEART AND SOUL OF YOUR INVESTMENT
The engine, transmission, and water pump are the heart and soul of that
investment.
If either fails, you're faced with a huge unexpected repair bill-Not to mention
the time consuming aggravation of haggling with the repair shop. Our Major Drive
Components Warranty is a unique, fully insured product warranty. Our warranty
covers parts and labor, plus towing and rental car, seals and gaskets,
replacement fluids, and is refundable 100% if never used.
REDUCES INTERNAL ENGINE PARTS TEMPERATURE
Acting like a heat sink, our cooling system product has the ability to remove
heat from internal engine parts. Reducing the operating temperature of your
engine has a major impact on the wear and tear of engine components. In engines
where high rpm's are required, such as race cars, this becomes critical to the
life span of the components such as valve springs, wrist pins, cylinder walls
and pistons. Increasing the life span of these components reduces costs when
rebuilding and helps to minimize failures.
FASTER ENGINE WARM UP
In a system that uses a thermostat or other means of controlling coolant flow
until a certain coolant temperature is obtained, our cooling system product
absorbs the heat of the engine parts, transferring heat evenly throughout the
engine. When our cooling system product is added to coolant it acts like a heat
sink. The coolant temperature rises faster, reducing the time for warm up. The
heat is evenly transferred to all of the engine parts creating a more even warm
up, reducing cold start-up wear and tear. Additionally, this translates into a
big fuel savings, allowing equipment to be put into service sooner with faster
warm up.
REDUCES ENGINE TEMPERATURE RISE DURING TRAFFIC JAMS
Our cooling system product will also keep your coolant temperature lower in
conditions where there is little or no airflow. With its ability to pull more
heat out of the motor and into the radiator, our cooling system product helps
keep your engine cooler while idling and helps keep your air conditioner cooler.
REDUCES COOLANT TEMPERATURE
Once Thermostat opens up, our cooling system product transfers all of the heat
it has absorbed into the radiator or cooling tower. Its ability to transfer this
heat will now make the radiator work more efficiently to remove heat from our
product coolant mixture.
REDUCES OIL TEMPERATURE
By reducing the temperature of the internal parts, our cooling system product
will also help to reduce oil temperatures. A reduced oil temperature means less
chance of oil breakdown and, in turn, decreases the chance of damage caused by
poor lubrication.
Our cooling system product Also: CLEANS AND LUBRICATES THE WATER PUMP REDUCES RUST, CORROSION, AND ELECTROLYSIS
EngineLast Industries Inc., 111 Northern Lights Blvd, Kalispell, MT 59901
1-888-222-0078, fax 1-406-752-8507